1. Added duct tape warning markers for the electrical cord. Sometimes you are going to use all the cord, and at least this way I have a warning before it is pulled tight inside. 3', 2', 1' or there abouts.
Added Orange duct tape warning markers |
3. For winterizing, I also found this Aluminum air hose bracket that screws directly to the camper city water connection. This makes it really easy to blow out the lines after a camping trip. Also, it is made so it doesn't damage the filter screen on the camper! Works great, and saves time winterizing. Also found on Amazon.
4. Having run out of Propane once, I couldn't see the indicator window with the black propane cover over the tanks and valves. On the camper side, I used a 2" hole saw bit and created a nice opening to view the window as well as to change the tank with the selector. Works great, especially once the front bunk is in the open position.
5. While not necessary for a 16' awning, there have been some reports of longer awnings bowing over time due to long distance travel and bumps in the road. This simple bracket pivots into postion to allow support of the awning in the closed position. A reinforcement plate was added (included in package) to allow you to Pop-rivet to the camper wall if there is not structure there. Luckily, I had both structure for the main bolts and used the pop rivits.
6. Counter space is a premium in our camper. So, the oven rack is a pain 90% of the time. Camco makes a universal oven cover that fastens to the camper counter along a hinge and folds into two positions. Now making regular sandwiches at lunch is not all over the dining table where you want to eat too!
Closed Position |
Half hinged, allows front burner to be used. |
Fully open, almost acts as a backsplash for the stove. |
No comments:
Post a Comment